ERP Series

Range

  • › Recuperator's ERP modules are made by combining multiple modules of different lenght.
    During installation, it is necessary to ensure the tightness between the sides through the use of special gaskets or sealants.

Download pdf

Material characteristics

Aluminium (AL)

Aluminium is used in most of the applications. This is thanks to its characteristics regarding corrosion resistance, ease of processing, non-flammability and reliability over the time.

Dimensions

Typology Model B1xB1 E1 A1 max Fins spacing
ERP 04 400 x 400 566 1500 2.3
ERP 05 500 x 500 707 1500 2.6
ERP 06 600 x 600 849 1800 2.7

Measurements in mm.
Maximum lengths can be divided into several modules according to steps and weights.

Options

Default

Available

Unvailable

Default

Available

Unvailable

F Series A/B Series E Series ERP Series
F Series A/B Series E Series ERP Series
GENERAL

XS

High differential pressure resistance

During production, the plates can be subjected to a special treatment in order to become resistant to pressure differences up to 2500 Pa.

FRAME

TV

Painted frame

The traditional frame can be protected with an epoxy paint against any aggressive substances. This option is usually associated with "AC option" painted fins.

SIDE PLATE

AR

Side plate with fold and turned

Galvanized steel side plate, with smooth top and easy installation (slide-in) combined with CD option.

AF

Side plate with 20 mm fold

Side panels in galvanized steel, with double lateral fold, designed for duct installation and reduced width. Not available with CD option.

AE

Side plate with fold

Side panels in galvanized steel, with double side fold, designed for duct installation. Available on all B and F series models, they can have a thickness ranging from 20 mm to 40 mm.

AZ

Hips reduced by 1 mm

Aluminum side plates, made with reduced thickness, with smooth top and easy installation (slide-in), combined with CD option. This solution (prerogative of some models of the B series) allows to have a greater finned surface, which can be important in small spaces. These devices are also very light and easy to handle.

PROFILES

CD

Special profile (combined with AZ and AR)

It is possible to combine special head covers so that they can be quickly installed in the air handling units (slide-in).

SEALING

NS

Silicon free

Recuperator devices are produced without the use of silicone. However, in some applications (for example, for high temperatures), in order to guarantee the sealing between air flows, it is necessary to use this sealant.

SC

Additional sealing

Option that guarantees a greater seal between the two air flows. This option is recommended in particular applications such as hospitals, clean rooms, spray booths etc.

SM

Mechanical sealing

Standard option produced during the stamping phase only for the F series.

BY-PASS
PDF

BS

Side bypass without damper

Option that provides a side by-pass section without damper.

BZ

Bypass centrale senza serranda

Option that provides a central by-pass section without damper.

BYPASS AND DAMPER
PDF

BP

Lateral bypass with external control damper

Option that includes a lateral by-pass section equipped with a damper with external control.

VP

Lateral bypass with painted damper external control

Option that includes a side by-pass section equipped with a painted damper with external control.

BD

Lateral bypass with internal control damper

Option that provides a side by-pass section equipped with damper with internal control.

BC

Central bypass with external control damper

Option that includes a central by-pass section equipped with a damper with external control.

BE

Central bypass with internal control damper

Option that includes a central by-pass section equipped with a damper with internal control.

FD

Lateral bypass with damper without plastic parts and internal control

Option that includes a side by-pass section equipped with a damper without plastic parts and with internal control.